Multi Channel Optical Switch
1xN
Multi Channel optical switch is a kind of light path control equipment, can realize multi-channel fiber optic light path switching. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-port optical sensors monitoring system.
Technical Index:
| Parameter |
Unit |
1x2 |
1x4 |
1x8 |
1x12 |
1x16 |
1x24 |
1x32 |
1x64 |
1x128 |
| Wavelength Range |
nm |
1260~1650 |
| Testing Wavelength |
nm |
1310/1550 |
| Insertion Loss (Typical) |
dB |
0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 1.0 |
| Insertion Loss (Max) |
dB |
≤0.8 | ≤0.8 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.2 |
| Return Loss |
dB |
SM ≥ 50 |
| Crosstalk |
dB |
≤ -70 |
| PDL |
dB |
≤ 0.05 |
| WDL |
dB |
≤ 0.20 |
| TDL |
dB |
≤ 0.20 |
| Repeatability |
dB |
≤ 0.02 |
| Lifetime |
times |
≥10⁷ |
| Swiching Time |
ms |
≤10 (Adjacent Channel) |
| Optical Power |
mW |
≤500 |
| Control Mode |
/ |
TTL or Customized |
| Operating Temperature |
℃ |
-10 ~ +55 |
| Storage Temperature |
℃ |
-40 ~ +85 |
| Module Type Dimensions |
mm |
135x64x32 | 135x60x37 | 184x78x66 | 184x156x66 |
|
Ordering Information:
| FOWS- |
XxX |
X |
XX |
X |
XX |
XX |
XX |
X |
| |
Config |
Mode |
Wavelength |
Package |
Fiber Type |
Fiber Diameter |
Fiber Length |
Connector |
| |
1x2 |
S=SM |
85=850nm |
B=Metal Box |
M5=50/125 |
25=250um |
05=0.5m |
0=None |
| |
1x4 |
M=MM |
13=1310 |
S=Specify |
M6=62.5/125 |
09=900um |
10=1.0m |
6=SC/UPC |
| |
1x8 |
|
15=1550 |
|
S9=9/125 |
S=Specify |
S=Specify |
7=FC/UPC |
| |
1x16 |
|
83/=850/1300 |
|
S=Specify |
|
|
A=FC/APC |
| |
1x32 |
|
35=1310/1550 |
|
|
|
|
B=SC/APC |
| |
1x64 |
|
S=Specify |
|
|
|
|
L=LC/UPC |
| |
1x128 |
|
|
|
|
|
|
N=LC/APC |
| |
S=Specify |
|
|
|
|
|
|
S=Specify |
|
Pin Configurations
DB-9 Male Connector (1xN≤16)
| DB-9 Male Connector |
| Pin No. |
I/O |
Signal |
Description |
| 1 |
Input |
D0 |
D0~D3 is channel selection Bit0~Bit3. D0 is low, D3 is high |
| 2 |
Input |
D1 |
| 3 |
Input |
D2 |
| 4 |
Input |
D3 |
| 5 |
Input |
Reset |
TTL, Low level reset to channel 0.
High level means channel selection bits are effective. |
| 6 |
Out |
Ready |
TTL, Ready (High=Not ready, Low=Ready) |
| 7 |
Out |
Error |
TTL, Error Or Failure (High=Error, Low=No Error) |
| 8 |
Power |
GND |
Ground |
| 9 |
Power |
VCC |
5.0±5% VDC Power Supply (max 500mA) |
|
DB-15 Male Connector (1xN≤128)
| DB-15 Male Connector |
| Pin No. |
I/O |
Signal |
Description |
| 2 |
Input |
D0 |
D0~D5 is channel selection Bit0~Bit4. D0 is low, D4 is high |
| 3 |
Input |
D1 |
| 4 |
Input |
D2 |
| 5 |
Input |
D3 |
| 6 |
Input |
D4 |
| 10 |
Input |
D5 |
| 11 |
Input |
Reset |
TTL, Low level reset to channel 0.
High level means channel selection bits are effective. |
| 7 |
Out |
Ready |
TTL, Ready (High=Not Ready, Low=Ready) |
| 8 |
Out |
Error |
TTL, Error or Failure, (High=Error, Low=No Error) |
| 1, 9 |
Power |
GND |
Ground |
| 12 |
Power |
VCC1 |
5.0V±5% VDC motor power (max 950mA) |
| 15 |
Power |
VCC2 |
5.0V±5% VDC Drive circuit power (max 50mA) |
| 13, 14 |
|
NC |
NC |
|
Control Chart:
Timing Diagram:
Channel Selection Table:
| Channel |
D0 |
D1 |
D2 |
D3 |
D4 |
D5 |
Reset |
| Com-0 |
x |
x |
x |
x |
x |
x |
0 |
| Com-1 |
0 |
0 |
0 |
0 |
0 |
0 |
1 |
| Com-2 |
1 |
0 |
0 |
0 |
0 |
0 |
1 |
| Com-3 |
0 |
1 |
0 |
0 |
0 |
0 |
1 |
| ..... |
|
|
|
|
|
|
1 |
| Com-126 |
1 |
0 |
1 |
1 |
1 |
1 |
1 |
| Com-127 |
0 |
1 |
1 |
1 |
1 |
1 |
1 |
| Com-128 |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
|
Dimension
1xN≤16 Optical Switch Size: 135x64x32mm
Dimension
1xN≤32 Optical Switch Size: 135x60x37mm
Dimension
1xN≤64 Optical Switch Size: 184x78x66mm
Dimension
1xN≤128 Optical Switch Size: 184x156x66mm
Multi Channel Optical Switch
Fiberdyne Labs, Inc.
127 Business Park Drive, Frankfort, New York
Toll Free: 800-894-9694
Phone: 315-895-8470
Fax: 315-895-8436
Email:
